Copy
May 2015

Apprenticeship Completion


Recently, Henrik Ørving has completed his apprenticeship at Air Service Vamdrup and is now full time Aircraft Technician, employed at our facilities at Eggemoen, Norway.

Photo: Henrik Ørving (right) with his diploma - next to Torben Biehl Jensen, our Business Development Director.

Turbomeca Arriel 2 Second Line Course in France

 
Early May, our Aircraft Technician Bjarne Jørgensen completed a Turbomeca Arriel 2 second line course at the Turbomeca facilities in Bidard, France. As you may know, Turbomeca produces engines for Airbus helicopters among others.

The second line course enables Bjarne to switch modules on the engine and carry out related inspections.

For our customers this means that we can perform many tasks on the engine ourselves - rather than having to send the engine to e.g. France. This will save both time and money. 

Earlier this year, Bjarne also completed a type course on the AS350B3e at Airbus.

Performing Cessna SID Inspections

At the moment, we perform a large number of Cessnas SID inspections. SID is short for Supplemental Inspection Documents and refer to a Cessna safety program related to Cessna 100 and 200 series aircraft of a certain age. 

If your Cessna is in need of a SID inspection, or if you are not sure whether it is in need, do not hesitate to contact us.

See Cessnas brief SID-introduction on YouTube (4:36 min.)

NEW: Follow us on facebook

Ferry from France
to Vamdrup


Earlier this year, Simon and Sascha ferried this wonderful Guimbal Cabri G2 from the Guimbal factory in Aix-en-Provence to Vamdrup, DK. See case

Invitation 

Fly-in and 1 Year Anniversary at Eggemoen, May 23rd


May 23rd we are happy to invite you to a fly-in & open hangar day at our facilities at Eggemoen Aviation & Technology Park in Hønefoss, approx. 60 km northwest of Oslo, Norway. At the same time we will be celebrating our 1 year anniversary at Eggemoen. The hangar will be full of a variety of aircraft and helicopters for aviation enthusiasts to see and admire. The hangar is open from 11.00 through 16.00.

Please, let us know if you're coming - and how many friends you intend to bring - at tbj@airservice.dk. If you sign up in advance, we'll 'reward' you with sausages from the grill, sodas and coffee :-)

NB! If you will be flying in, please also let us know - and please note that landing fee is free of charge during this day.

Eggemoen: ICAO code: ENEG, freq.: 122,700.

A&P Certificate for N-reg. Aircraft

We are happy to inform you, that Torben Biehl Jensen, our Business Development Director (and Technician), has now an American FAA A&P certificate for N-reg. aircraft. FAA A&P certificated mechanics may perform or supervise the maintenance and perform preventive maintenance or alteration of an N-registered aircraft or appliance. 

NB! Daily FAA A&P service will be available at Air Service Eggemoen.
Cirrus Factory Course, US

As you may very well know, Air Service Vamdrup is an authorized Cirrus Service Center in Norway. To preserve and maintain this status, we must complete courses at the Cirrus factories in the US, to keep ourselves updated on all areas related to the Cirrus aircraft.

this April, Torben Biehl Jensen completed a 14 day course in Duluth in Minnesota, US, on how to repair the composite that Cirrus planes are built of. During the course, he also learned more about 'Cirrus CAPS' - aka the Cirrus Airplane Parachute System.

Did you know that.... As of February 2015, Cirrus had delivered over 5,800 aircraft in 16 years of production. The company was founded in 1984.
Spring is here, and spring is equal to a new rotation of annual inspections of the many Russian PC-12 aircraft, for which we are responsible. As a result, there is great bustle in the workshop in Vamdrup these days....

Another 5 Release Certificates for Pilatus PC-12 
In December, we completed a Pilatus PC-12 type course for technicians at our facilities at Vamdrup. As a result, we obtained an EASA approval to conduct an internal course for five of our own technicians, and we are happy to share with you that these technicians now have passed their test and thus formally have obtained the approval (B1 + B2).

The five release certificates are important to both us and our customers as they enable us to handle an even larger workload related to the popular single engine turboprop aircraft - the Swiss produced Pilatus PC-12.

We wish everyone blue skies and many happy landings! 

Best regards,

Air Service Vamdrup 
 
Denmark: Lufthavnsvej 7A, DK-6580 Vamdrup / +45 75 58 37 08 Norway: Flyplassveien 25, N-3514 Hønefoss / +47 21 999 708
info@airservice.dk / www.airservice.dk
Information in this newsletter is subject to verification and we reserve the right to make changes due to misprints, errors and omissions. 
Copyright © 2015 Air Service Vamdrup ApS, All rights reserved.


unsubscribe from this list    update subscription preferences 

Email Marketing Powered by Mailchimp

View this email in your browser